22mm Brushless Drive Kit ESC:BLHeli_32 Loctite 243 or equivalent should

Loctite 243 or equivalent should be used to retain the 4 gearbox screws for best results

Now offering AM32 firmware in the same compact ESC as our 35A BLHeli_32 ESCs

This ESC comes programmed to work well for brushless drive

Rectified Robotics 22mm Brushless Drives are best paired with a Blheli_32 ESC

Note: If only running "Opto" ESCs (only two wires in PWM cable)

22mm Brushless Drive Kit ESC:BLHeli_32 Loctite 243 or equivalent shouldThe 22mm Brushless Drive Kit comes with two Rectified 22mm Brushless Drives, two 35A ESCs preprogrammed for bidirectional operation, and two power distribution boards. Choose between BLHeli_32 and AM32 ESCs. This means that all you have to do is solder the motors to the ESCs, wire in your battery, and plug them into your receiver to have a fully operational brushless drive for your Beetleweight. Kit Contents: 2x Rectified Robotics 22mm Brushless Drive